ADVERTISEMENT

Free Will Brewing Co.'s “Pale Stout Ale” Recipe

This should be a good “transitional” pale stout! More amber than gold, it’s still far lighter than a proper “dark” stout and still has the complex roast we expect and the creamy mouthfeel that we deserve.

John Stemler, Free Will Brewing Co. Jul 24, 2018 - 2 min read

Free Will Brewing Co.'s “Pale Stout Ale” Recipe Primary Image

ALL-GRAIN  

Batch size: 5 gallons (19 liters)
Brewhouse efficiency: 72%
OG: 1.051
FG: 1.010
IBUs: 25
ABV: 4.9%
 

MALT/GRAIN BILL 

7.5 lb (3.4 kg) pale malt
1 lb (454 g) flaked barley
0.25 lb (113 g) Briess Extra Special Roast
0.25 lb (113 g) Pale chocolate malt
0.25 lb (113 g) Briess roasted barley
 

HOPS SCHEDULE 

0.5 oz (14 g) Challenger [10% AA] at 60 minutes
0.75 oz (21 g) Kent Goldings [4% AA] at 15 minutes

ADVERTISEMENT

YEAST 

Wyeast 1026 (Cask Ale)

DIRECTIONS 

Mill the grains and mix with 2.9 gallons (11 l) of 163°F (73°C) strike water to reach a mash temperature of 152°F (67°C). Hold for 60 minutes. Vorlauf until runnings are clear, then run off into kettle. Sparge the grains with 4.3 gallons (16.5 l) and top up as necessary to obtain 6 gallons (23 l) of wort. Boil for 60 minutes, following the hops schedule.

After the boil, chill the wort to slightly below fermentation temperature about 60°F (16°C). Aerate the wort and pitch the yeast.

Ferment at 68°F (20°C). Cold crash, then bottle or keg the beer and carbonate to 2 volumes of CO2.

Tips for Success

This should be a good “transitional” pale stout! More amber than gold, it’s still far lighter than a proper “dark” stout and still has the complex roast we expect (thanks to the pale chocolate and lighter-than-usual roasted barley from Briess) and the creamy mouthfeel (thanks to the flaked barley) that we deserve. Also, Brewmaster John Stemler notes that the Wyeast 1026 was the only yeast that did just the right things for this beer, and I’m inclined to take him at his word!

ARTICLES FOR YOU