The Scottish 80, also called an “export” by the BJCP guidelines, is a strong ale by Scottish standards. The export name means that this is an ale with a higher alcohol content (3.9 to 4.9 percent) that was intended to survive trans-Atlantic voyages. The increased alcohol content of these beers blends well with the toasty and roasty flavors of the grains. Hops bitterness and flavor are subdued enough to make this a malty, but not cloying, brew. Some examples of the 80s may show a hint of smokiness.
Batch size: 5 gallons (19 liters)
Brewhouse efficiency: 72%
OG: 1.040–1.050
FG: 1.013–1.017
IBUs: 15–25
ABV: 3.9–4.9%
MALT/GRAIN BILL
8 lb (3.6 kg) pale malt
2 oz (57 g) peat-smoked malt
6 oz (170 g) Carapils malt
6 oz (170 g) roasted barley
HOPS AND ADDITIONS SCHEDULE
4 oz (113 g) treacle at 90 minutes
1 oz (28 g) Cascade pellets [7% AA] at 90 minutes
1 tsp Irish moss at 15 minutes
YEAST
Wyeast 1728 Scottish Ale Yeast or White Labs WLP028 Edinburgh Scottish Ale Yeast
DIRECTIONS
Mash the crushed grains at the rate of 1 pound (454 g) of malt to 1 quart (946 ml) of water that is 15°F (8°C) higher than your desired mash rest temperature. So, for this 80-Shilling beer, heat 9 quarts of water to 173°F (78°C) and mix in the crushed malts. Adjust the mash temperature with hot or cold water to 158°F (70°C).
Hold for 1 hour in an insulated mash vessel. Recirculate until the wort runs clear. Sparge the grains into the boil kettle with 172°F (78°C) water until you get a total volume of 6 gallons (22.7 l), which will be subsequently boiled down to 5 gallons (19 l). When the wort comes to a boil, add the treacle and the bittering hops. Boil for 90 minutes. Fifteen minutes before the end of the boil, add the Irish moss (for beer clarity) to the boiling mixture. When the boil is complete, chill to below 80°F (27°C) and pitch the yeast. Vigorously aerate the wort. Ferment at 55–70°F (13–21°C) for 10 days.
Transfer to a secondary fermentor and continue until the fermentation is complete (about 2 more weeks). Transfer to a bottling bucket and condition by adding 1 1/4 cup (59 ml) of dry malt extract (DME) or ¾ cup (177 ml) of corn sugar that has been boiled in 2 cups (473 ml) of water. Bottle and cap. Let sit for 10 days at 65–70°F (18–21°C). When carbonation is achieved, store at refrigerator temperature.